Factory Cheap Modulator Rf Catv - DVI 1X8 – GreenGo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We support our purchasers with ideal premium quality products and substantial level company. Becoming the specialist manufacturer in this sector, we've acquired rich practical working experience in producing and managing for Gg-3000m Analog Headend Agile Pal Atsc Modulator, Dvbc Encoder Modulator, Mini Edfa Catv, We promise to try our greatest to deliver you with high quality and economical products and services.
Factory Cheap Modulator Rf Catv - DVI 1X8 – GreenGo Detail:

FEATURES
l 1x DVI input and 8xDVI output
l Support resolution:up to 4096×2160@30Hz
l Support for long distance signal transmission
l Installs in minutes, No loss of quality
l Supports wide range voltage DC input (DC12V)
PACKAGE CONTENTS:
1. Main unit             1pcs
2. AC power adapter      1pcs
3. User manual          1pcs          
FEATURES OF THE INTERFACE:

1

 

FIG.1.0 Rear Panel View

 

DC12V: DC input
IN: DVI-D input port
OUT 1-8: DVI-D output port   
ON/OFF: Power Switch                              
NOTE : EDID MODE: After the splitter is powered on, and then there is a display machine connected to the OUT1, the splitter will get the EDID of display machine connected OUT 1. If there is no any display machine connected to output1, the machine will use default EDID output.
 

 2

 

 FIG.1.0 Front Panel View

Power: Power LED
Signal: Signal LED
1 – 8: OUT LED

OPERATIONG AND CONNECTION:

  1. Connect one single link DVI-D cable from a DVI signal source into the input port of splitter.
  2. Connect single link DVI-D cables from TV/Monitor into the DVI output ports of splitter.
  3. If the resolution is higher than 1920X1080@60Hz, you must use a DVI-D cables, the signal source and the display must be able to support this resolution.
  4. Connect DC plug of AC adapter to DC jack and inserted into the power socket.

2019-04-30_114500

FIG.1.1 CONNECTION DIAGRAM

 
SPECIFICATIONS:                                    
DVI interface type ………………………………………………………………….DVI-D 29-pin, female
Single link input/output resolution …………………………………………up to 4096×2160@30Hz
Max signal bandwidth………………….………………………………………………..340MHz
Max baud rate…………………….………………………….………………3.4Gbps Serial Link
Input/Output TMDS signal ………….……………………….…..……….0.5~1.5Volts p-p(TTL)
Input/Output DDC signal …………………………..……….…………………. 5Volts p-p (TTL)  
Max working current ……………………………….………………………… …………1A/12V
Power adapter ………………………………………AC 100V~240V 50HZ/60Hz, DC12V/2A
Operating Temperature range …………..……………………………………………. -5 to +45℃
Storage Temperature range…………………………………………………………. -15 to +55℃
Operating Humidity range ………………….……….…..…….10 to 90%RH (No Condensation)
Storage Humidity range………………………….………………5 to 95%RH (No Condensation)
Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the machine.

  1. The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
  2. All parts will be free from the strong shake, hit, fall.
  3. Touching the power adaptor with the wet hands is prohibited.
  4. Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
  5. Pls turn the power off when the machines not used for long time.
  6. Pls do not open the cover and do not touch the inside parts.
  7. Pls use the original factory power adaptor.

FAQ:
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:

No.

Problem Description

Solutions

1

Non-Power-Connected

1. Check if the power adaptor head is truly and correctly inserted the power socket.
2. Check the power if it is in on status.

2

No Picture / Abnormal Picture

1. Confirm the device has been turned on and properly connected.
2. Check the signal source output resolution is appropriate.
3. Device EDID read error, please reboot.
4. Check the cable quality.

3

Display format is not supported

  1. If the display unit does not support the resolution, you need to change the signal source output resolution.
  2. Change the signal source refresh frequency.

Product detail pictures:

Factory Cheap Modulator Rf Catv - DVI 1X8 – GreenGo detail pictures

Factory Cheap Modulator Rf Catv - DVI 1X8 – GreenGo detail pictures


Related Product Guide:
Countryfile spoilers: Matt Baker bee segment leaves viewers utterly stunned ‘So wrong’ | TV & Radio | Showbiz & TV | Qam Modulator Catv
Global Hybrid Fiber Coaxial Market 2019-2025 | Overview, Technology Trends, Growth Factors, Opportunities and Key Players Like | Hd Encoder Modulator

Being supported by an state-of-the-art and skilled IT team, we could supply technical support on pre-sales & after-sales service for Factory Cheap Modulator Rf Catv - DVI 1X8 – GreenGo, The product will supply to all over the world, such as: Portland, Nigeria, Mexico, Really should any of these items be of interest to you, please let us know. We will be pleased to give you a quotation upon receipt of one's detailed specifications. We've our personal specialist R&D enginners to meet any of the requriements, We look forward to receiving your enquires soon and hope to have the chance to work together with you inside the future. Welcome to take a look at our organization.
  • High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
    5 Stars By Fay from Algeria - 2016.10.27 12:12
    Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
    5 Stars By Deborah from Turkmenistan - 2015.06.09 12:42

    Related Products

    WhatsApp Online Chat !