Factory making Digital Lnb Satellite Receiver - DVI 1X8 – GreenGo

Short Description:

Product Detail

Product Tags

Feedback (2)

The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for Fiber Cable, Lnb Universal Hd, Isdbt Encoder Modulator, Since establishment within the early 1990s, now we have arrange our sale network in USA, Germany, Asia, and several Middle Eastern countries. We intention to get a top class supplier for worldwide OEM and aftermarket!

Factory making Digital Lnb Satellite Receiver - DVI 1X8 – GreenGo Detail:

FEATURES：
l 1x DVI input and 8xDVI output
l Support resolution:up to 4096×2160@30Hz
l Support for long distance signal transmission
l Installs in minutes, No loss of quality
l Supports wide range voltage DC input (DC12V)
PACKAGE CONTENTS:

1. Main unit             1pcs
2. AC power adapter      1pcs
3. User manual          1pcs

FEATURES OF THE INTERFACE:

FIG.1.0 Rear Panel View

DC12V: DC input

IN: DVI-D input port
OUT 1-8: DVI-D output port
ON/OFF: Power Switch
NOTE : EDID MODE: After the splitter is powered on, and then there is a display machine connected to the OUT1, the splitter will get the EDID of display machine connected OUT 1. If there is no any display machine connected to output1, the machine will use default EDID output.

FIG.1.0 Front Panel View

Power: Power LED
Signal: Signal LED
1 – 8: OUT LED

OPERATIONG AND CONNECTION:

Connect one single link DVI-D cable from a DVI signal source into the input port of splitter.
Connect single link DVI-D cables from TV/Monitor into the DVI output ports of splitter.
If the resolution is higher than 1920X1080@60Hz, you must use a DVI-D cables, the signal source and the display must be able to support this resolution.
Connect DC plug of AC adapter to DC jack and inserted into the power socket.

FIG.1.1 CONNECTION DIAGRAM

SPECIFICATIONS:
DVI interface type ………………………………………………………………….DVI-D 29-pin, female
Single link input/output resolution …………………………………………up to 4096×2160@30Hz
Max signal bandwidth………………….………………………………………………..340MHz
Max baud rate…………………….………………………….………………3.4Gbps Serial Link
Input/Output TMDS signal ………….……………………….…..……….0.5~1.5Volts p-p(TTL)
Input/Output DDC signal …………………………..……….…………………. 5Volts p-p (TTL)
Max working current ……………………………….………………………… …………1A/12V
Power adapter ………………………………………AC 100V～240V 50HZ/60Hz, DC12V/2A
Operating Temperature range …………..……………………………………………. -5 to +45℃
Storage Temperature range…………………………………………………………. -15 to +55℃
Operating Humidity range ………………….……….…..…….10 to 90%RH (No Condensation)
Storage Humidity range………………………….………………5 to 95%RH (No Condensation)
Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the machine.

The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
All parts will be free from the strong shake, hit, fall.
Touching the power adaptor with the wet hands is prohibited.
Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
Pls turn the power off when the machines not used for long time.
Pls do not open the cover and do not touch the inside parts.
Pls use the original factory power adaptor.

FAQ:
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:

No.	Problem Description	Solutions
1	Non-Power-Connected	1. Check if the power adaptor head is truly and correctly inserted the power socket. 2. Check the power if it is in on status.
2	No Picture / Abnormal Picture	1. Confirm the device has been turned on and properly connected. 2. Check the signal source output resolution is appropriate. 3. Device EDID read error, please reboot. 4. Check the cable quality.
3	Display format is not supported	If the display unit does not support the resolution, you need to change the signal source output resolution. Change the signal source refresh frequency.

Product detail pictures:

We'll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of intercontinental top-grade and high-tech enterprises for Factory making Digital Lnb Satellite Receiver - DVI 1X8 – GreenGo, The product will supply to all over the world, such as: Mecca, Pretoria, Spain, We are very responsible for all details on our customers order no matter on warranty quality, satisfied prices, quick delivery, on time communication, satisfied packing, easy payment terms, best shipment terms, after sales service etc. We provide one-stop service and best reliability to our every customers. We work hard with our customers, colleagues, workers to make a better future.

Digital Optical Transmitter

Dvb S2 Modulator

Gge-40ea Series 1550nm Erbium-Doped Optical Fiber Amplifier (Module)

H 264 Encoder

Hd Rf Encodulator

High Quality Line Amplifier

We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!

By Jerry from United States - 2015.09.12 17:18

We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.

By Candy from Namibia - 2015.09.12 17:18