DVI 1X8
Goirid Tuairisgeul:
l 1x DVI a-steach agus 8xDVI toradh
l Support resolution:up to 4096×[email protected]
l Taic airson astar fada chomharran sgaoilidh
l Stàlaichidh ann am mionaid, No call càileachd
l Taic raon farsaing bholtaids a-steach DC (DC12V)
D ACKAGE CLAR- :
2. cumhachd AC adapter 1pcs
3. Cleachdaiche làimhe 1pcs
FIG.1.0 Rear Panel View
O ut 1-8 : DVI-D output port
ON / OFF: Power Switch
NOTE: EDID MODE: After the splitter is powered on, and then there is a display machine connected to the OUT1, the splitter will get the EDID of display machine connected OUT 1. If there is no any display machine connected to output1, the machine will use default EDID output.
FIG.1.0 Beulaibh Panel View
Cumhachd: Power LED
Signal: Signal LED
1 - 8: A-MACH LED
OPERATIONG AGUS CEANGAL :
- Ceangail aon cheangal DVI-D càball bho DVI chomharran an tùs a-steach an taic port splitter.
- Ceangail aon cheangal DVI-D càbaill bho Tbh / Cùm sùil a-steach an DVI toradh puirt splitter.
- If the resolution is higher than [email protected], you must use a DVI-D cables, the signal source and the display must be able to support this resolution.
- Ceangail DC plug de AC adapter gu DC jack agus a chur a-steach cumhachd-socaid.
FIG.1.1 CEANGAL DIAGRAM
-chomharrachaidhean:
DVI eadar-aghaidh-seòrsa ........................................................................... .DVI-D 29-pin, female
Single link input/output resolution …………………………………………up to 4096×[email protected]
Max chomharran bandwidth ...................... ...................................................... ..340MHz
Max baud ìre ......................... ............................... .................. 3.4Gbps Sreathan irisean Ceangal
Input / Species TMDS comharra ............. ........................... . ... .. ......... .0.5 ~ 1.5Volts pp (TTL)
Input / Species DDC comharra .............................. .. .......... ...................... 5Volts pp (TTL)
Max ag obair an-dràsta ..................................... .............................. ............ 1A / 12V
Power adapter .............................. ............... AC 100V ~ 240V 50HZ / 60Hz, DC12V / 2A
Obrach Teòthachd raon ............ .. .................................................... -5 gu + 45 ℃
Storage Teòthachd raon ................................................................... -15 gu + 55 ℃
Obrach Taiseachd raon ...................... .......... ...... .. ... .10 gu 90% RH (No Co-dhlùthachadh)
Storage Taiseachd raon ............................... .................. 5 gu 95% RH (No Co-dhlùthachadh)
Notes:
Pls a 'cleachdadh an inneil mar an teagasg an liosta a' cumail an cleachdadh fada a mhaireas an inneal.
- An t-inneal a bu chòir a bhith air an cur aig an àite fada bho thais, Àrd-Teòthachd, Dusty, Erosive, agus oxidative àrainneachd.
- H-uile pàirt a bhios saor bho làidir crathadh, a bhualadh, air tuiteam.
- Suathadh cumhachd adapter le fliuch làmhan air a thoirmeasg.
- Pls chumail cumhachd adapter ceann agus chan eil an 'Further cumhachd còrd nuair a ghearradh bhon socaid.
- Pls Cuir cumhachd dheth nuair nach eil na h-innealan a chleachdadh airson ùine fhada.
- Pls Chan eil Fosgail an còmhdach agus cha bhi beantuinn taobh a-staigh phàirtean.
- Pls cleachdadh thùsail factaraidh cumhachd adapter.
FAQ:
Mus cumhachd air, pls sùil air a 'cheangal loidhne gu faiceallach. Agus dèanamh cinnteach gu bheil a h-uile nall Mar as trice tha co-cheangailte. Tha cumanta trioblaid losgadh dòigh a 'sealltainn gu h-ìosal:
|
Chan eil. |
Problem Tuairisgeul |
Solutions |
|
1 |
Neo-Cumhachd-Connected |
1. Dèan cinnteach ma tha an cumhachd adapter ceann air a fìrinneach agus ceart a chur an cumhachd socaid. 2. Thoir sùil air cumhachd ma tha e ann air inbhe. |
|
2 |
No Picture / neo-àbhaisteach Picture |
1. Dearbhaich an t-inneal air a bhith air a thionndadh air ceart agus co-cheangailte. 2. Thoir sùil air a 'chomharra an tùs toradh rùn a tha iomchaidh. 3. inneal EDID leughadh mearachd, cuiribh reboot. 4. Lorg an càball càileachd. |
|
3 |
Taisbeanadh Inneal a 'Chlàir Chan eil taic |
|
