DVI1x2

KARATTERISTIĊI:

• 1x input DVI u l-output 2xDVI
• Support resolution:up to 4096×[email protected]
• Appoġġ għat-trasmissjoni tas-sinjali distanza twila
• Jistalla fil-minuti, Nru telf ta 'kwalità
• Jappoġġja vultaġġ firxa wiesgħa DC input (DC5V)

WERREJ PAKKETT:
1. 1pcs unità prinċipali
2. AC adapter enerġija 1pcs
3. manwali Utent 1pcs
KARATTERISTIĊI TAL-INTERFACE:

FIG.1.0 wara Bord View

DC5V: input DC
IN:-port input DVI-D
OUT 1-4: DVI-D output port
NOTA: MODE EDID: Wara l-isplitter huwa mħaddem fuq, u allura hemm magna wirja konness mal-OUT1,-isplitter se tikseb l- EDID ta 'magna wiri konnessi OUT 1. Jekk ma jkunx hemm xi makna wiri konness mal output1, il-magna se tuża l-output EDID kontumaċja.

 
FIG.1.0 Front Panel View

Power: Power LED
Sinjal: Sinjal LED
OPERATIONG AND CONNECTION:
1.Connect one single link DVI-D cable from a DVI signal source into the input port of splitter.
2.Connect single link DVI-D cables from TV/Monitor into the DVI output ports of splitter.
3.Connect DC plug of AC adapter to DC jack and inserted into the power socket.

DIJAGRAMMA KONNESSI grafika 1.1

SPEĊIFIKAZZJONIJIET:
DVI interface tip ........................................................................... .DVI-D 29-pin, nisa
Single link input/output resolution …………………………………………up to 4096×[email protected]
bandwidth sinjal Max ...................... ...................................................... ..340MHz
rata baud mass ......................... ............................... .................. Rabta Serial 3.4Gbps
TMDS Input / output sinjal ............. ..................... ....... ... .. ......... .0.5 ~ pp 1.5Volts (TTL)
Input / Output 'DDC sinjal .............................. .. .......... ...................... Pp 5Volts (TTL)
Max ħidma preżenti ..................................... .............................. ............ 1.2a / 5V
Enerġija adapter ........................... ..................... AC 100v ~ 240V 50Hz / 60Hz, DC5V / 2A
firxa tat-temperatura operattiva ............ .. .................................................... -5 u + 45 ℃
firxa tat-temperatura Ħażna ................................................................... -15 sa + 55 ℃
firxa Umdità Operattiva ...................... .......... ... .. ...... 0.10-90% RH (Nru kondensazzjoni)
Ħażna Umdità firxa ............................... .................. 5-95% RH (Nru kondensazzjoni)
Noti:
PLS tuża l-magna bħala l-istruzzjoni elenkat biex iżommu l-użu ħajja twila tal-magna.
1.The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2.All parts will be free from the strong shake, hit, fall.
3.Touching the power adaptor with the wet hands is prohibited.
4.Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5.Pls turn the power off when the machines not used for long time.
6.Pls do not open the cover and do not touch the inside parts.
7.Pls use the original factory power adaptor.
FAQ:
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: