DVI1x2
Short Description:
အင်္ဂါရပ်များ:
- 1x DVI input ကိုနှင့် 2xDVI output ကို
- Support resolution:up to 4096×[email protected]
- ရှည်လျားသောအကွာအဝေး signal ကိုထုတ်လွှင့်မှုအတွက်ပံ့ပိုးမှု
- , မိနစ်အရည်အသွေးအဘယ်သူမျှမအရှုံးတပ်ဆင်ပြီး
- ကျယ်ပြန့်ဗို့အား DC က input ကို (DC5V) ကိုအထောက်အပံ့ပေးနိုင်ပါတယ်
Package Contents:
1. ပင်မယူနစ် 1pcs
2. AC ပါဝါ adapter 1pcs
3. အသုံးပြုသူကို manual 1pcs
ကို interface အင်္ဂါရပ်များ:
FIG.1.0 နောက် Panel ကိုကြည့်ရန်
DC5V: DC က input ကို
DVI-D ကို input ကို port ကို: IN
OUT: 1-4 DVI-D ကို output ကို port ကို
မှတ်ချက်: EDID MODE: အ splitter အပေါ် powered ပြီးနောက်, အဲဒီနောက် OUT1 ချိတ်ဆက်ထားတဲ့ display ကိုစက်လည်းမရှိ, အ splitter ပုရလိမ့်မယ် output1 ချိတ်ဆက်ထားသောမည်သည့် display ကိုစက်မပါရှိခဲ့လျှင် 1. OUT ချိတ်ဆက် display ကိုစက် EDID, စက်က default EDID output ကိုသုံးပါလိမ့်မယ်။
FIG.1.0 တပ်ဦး Panel ကိုကြည့်ရန်
Power: ပါဝါနဲ့ LED
အချက်ပြ: Signal ကို LED
OPERATIONG AND CONNECTION:
1.Connect one single link DVI-D cable from a DVI signal source into the input port of splitter.
2.Connect single link DVI-D cables from TV/Monitor into the DVI output ports of splitter.
3.Connect DC plug of AC adapter to DC jack and inserted into the power socket.
တိကျတဲ့:
DVI interface ကိုအမျိုးအစား ........................................................................... .DVI-D ကို 29-pin ကိုအမျိုးသမီး
Single link input/output resolution …………………………………………up to 4096×[email protected]
..................... မက်စ် signal ကို bandwidth ကို။ ...................................................... ..340MHz
မက်စ် baud rate ကို ........................ ။ .............................. ။ .................. Serial Link ကို 3.4Gbps
Input / Output TMDS ............ အချက်ပြ။ ..................... ...... ။ ... .. ......... .0.5 ~ 1.5Volts စစ (TTL)
Input / Output DDC signal ကို .............................. .. ......... ။ ..................... ။ 5Volts စစ (TTL)
မက်စ်ဟာလက်ရှိ .................................... အလုပ်လုပ်ကိုင်။ .............................. ............ 1.2A / 5V
Power က adapter ........................... ..................... AC အ 100V ~ 240V 50HZ / 60Hz, DC5V / 2A
Operating အပူချိန်အကွာအဝေး ............ .. ................................................... ။ -5 + 45 ℃မှ
သိုလှောင်အပူချိန်အကွာအဝေး .................................................................. ။ -15 55 + သို့℃
Operating စိုအကွာအဝေး ..................... ။ ......... ။ ... .. ...... .10 90% RH အ (အဘယ်သူမျှမငွေ့ရည်ဖွဲ့)
သိုလှောင်ရေးစိုအကွာအဝေး .............................. ။ .................. 5% မှ 95 RH အ (အဘယ်သူမျှမငွေ့ရည်ဖွဲ့)
မှတ်စုများ:
နည်းဥပဒေစာရင်းအဖြစ် Pls စက်၏ရှည်လျားသောအသုံးပြုမှုကိုတစ်သက်တာစောင့်ရှောက်ဖို့စက်ကိုအသုံးပြုပါ။
1.The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2.All parts will be free from the strong shake, hit, fall.
3.Touching the power adaptor with the wet hands is prohibited.
4.Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5.Pls turn the power off when the machines not used for long time.
6.Pls do not open the cover and do not touch the inside parts.
7.Pls use the original factory power adaptor.
အမြဲမေးလေ့ရှိသောမေးခွန်းများ:
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:
အမှတ် |
ပြဿနာဖျေါပွခကျြ |
ဖြေရှင်းနည်းများ |
1 |
non-Power-Connected |
1. စစ်ဆေးမှုပါဝါအဒက်တာဦးခေါင်းအမှန်တကယ်မှန်ကန်စွာပါဝါ socket ထည့်ထားပါက။ က status ကိုပေါ်၌တည်ရှိ၏လျှင် 2. ပါဝါကိုစစ်ဆေးပါ။ |
2 |
အဘယ်သူမျှမရုပ်ပုံ / ပုံမှန်မဟုတ်သောရုပ်ပုံ |
1. စက်ကိုဖွင့်ခြင်းနှင့်စနစ်တကျချိတ်ဆက်ထားပြီးအတည်ပြုပါ။ 2. signal ကို source ကို output ကို resolution ကိုသင့်လျော်သည်ကိုစစ်ဆေးပါ။ 3. Device ကို EDID အမှားဖတ် reboot ပေးပါ။ 4. cable ကိုအရည်အသွေးကိုစစ်ဆေးပါ။ |
3 |
display format ကိုပံ့ပိုးပေးမထားပါ |
|