DVI1x2
Korte beschrijving:
KENMERKEN:
- 1x DVI ingang en uitgang 2xDVI
- Support resolution:up to 4096×[email protected]
- Ondersteuning voor signaaloverdracht over lange afstanden
- In enkele minuten geïnstalleerd, Geen verlies van kwaliteit
- Ondersteunt uitgebreide lijst voltage DC-ingang (5 V)
Inhoud verpakking:
1. Hoofdeenheid 1pcs
2. AC-adapter 1pcs
3. Gebruikershandleiding 1pcs
KENMERKEN van de interface:
DC5V: DC-ingang
IN: DVI-D-ingangspoort
OUT 1-4: DVI-D uitvoerpoort
OPMERKING: EDID MODE: Nadat de splitter wordt ingeschakeld, en dan is er een beeldscherm aangesloten aan de uitgangen OUT1, de splitter zal krijgen EDID van display machine verbonden OUT 1. Als er geen een display machine aangesloten OUTPUT1 de machine standaard EDID uitvoer.
Power: Power LED
Signaal: Signal LED
OPERATIONG AND CONNECTION:
1.Connect one single link DVI-D cable from a DVI signal source into the input port of splitter.
2.Connect single link DVI-D cables from TV/Monitor into the DVI output ports of splitter.
3.Connect DC plug of AC adapter to DC jack and inserted into the power socket.
SPECIFICATIES:
DVI type interface ........................................................................... .dvi-D 29-pins, vrouwelijke
Single link input/output resolution …………………………………………up to 4096×[email protected]
Max signaalbandbreedte ...................... ...................................................... ..340MHz
Max baud rate ......................... ............................... .................. 3.4Gbps Serial Link
Input / Output TMDS signaal ............. ..................... ....... ... .. ......... .0.5 ~ 1.5Volts pp (TTL)
Input / Output DDC signaal .............................. .. .......... ...................... 5volts pp (TTL)
Max werkende stroom ..................................... .............................. ............ 1.2A / 5V
Power adapter ........................... ..................... AC 100V ~ 240V 50Hz / 60Hz, DC5V / 2A
Operating Temperatuur ............ .. .................................................... -5 tot + 45 ℃
opslagtemperatuur ................................................................... -15 tot + 55 ℃
luchtvochtigheidsbereik ...................... .......... ... .. ...... 0,10-90% RH (geen condensatie)
Opslagvochtigheidsgraad bereik ............................... .................. 5 tot 95% RH (geen condensatie)
Opmerkingen:
Pls gebruik maken van de machine als de vermelde het langdurig gebruik levensduur van de machine te houden instructie.
1.The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2.All parts will be free from the strong shake, hit, fall.
3.Touching the power adaptor with the wet hands is prohibited.
4.Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5.Pls turn the power off when the machines not used for long time.
6.Pls do not open the cover and do not touch the inside parts.
7.Pls use the original factory power adaptor.
FAQ:
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:
Nee. |
Beschrijving van het probleem |
Oplossingen |
1 |
-Non-Power Connected |
1. Controleer of de voedingsadapter hoofd werkelijk en correct is geplaatst het stopcontact. 2. Controleer de macht als het in over de status. |
2 |
Geen beeld / Abnormaal Picture |
1. Bevestig het apparaat is ingeschakeld en aangesloten. 2. Controleer het signaal dat wordt uitgestuurd resolutie geschikt is. 3. Inrichting EDID leesfout, dan kunt u opnieuw op te starten. 4. Controleer de kabel kwaliteit. |
3 |
Weergave-indeling wordt niet ondersteund |
|