DVI1x2

MATAUPU:

• 1x galuega faatino sao ma 2xDVI DVI
• Support resolution:up to 4096×[email protected]
• Support mo le auina atu faailo umi mamao
• Installs i minute, leai se aveesea o tulaga aupito manaomia
• Lagolagoina lautele volitiga eseese sao DC (DC5V)

Afifi MATAUPU:
1. 1pcs iunite Autu
2. mea faʻatatau mana AC 1pcs
3. 1pcs tusi lesona faaaogāina
MATAUPU O le Ofisa:

Vaega FIG.1.0 tausia View

DC5V: DC sao
I: taulaga sao DVI-D
FAFO 1-4: DVI-D taulaga galuega faatino
FAAMANATU: EDID Faiga: Ina ua afi a le splitter i luga, ona o loo i ai se faaaliga masini e fesootai i le OUT1, o le a maua le splitter le fesootai EDID o faaaliga masini FAFO 1. Afai e leai so o se masini faaaliga e fesootai i output1, o le a faaaoga le masini galuega faatino EDID faaletonu.

 
Vaega FIG.1.0 Luma View

Mana: mana taitaiina
faailoilo: faailoga Taitaiina
OPERATIONG AND CONNECTION:
1.Connect one single link DVI-D cable from a DVI signal source into the input port of splitter.
2.Connect single link DVI-D cables from TV/Monitor into the DVI output ports of splitter.
3.Connect DC plug of AC adapter to DC jack and inserted into the power socket.

FIG.1.1 ata Sootaga

Auiliili:
ituaiga Ofisa DVI ........................................................................... .DVI-D 29-pine, fafine
Single link input/output resolution …………………………………………up to 4096×[email protected]
bandwidth faailo Max ...................... ...................................................... ..340MHz
Max fua faatatau baud ......................... ............................... .................. 3.4Gbps Link Serial
sao / TMDS Galuega Faatino faailoa ............. ..................... ....... ... .. ......... .0.5 ~ 1.5Volts pp (TTL)
sao / Galuega Faatino DDC faailoa .............................. .. .......... ...................... 5Volts pp (TTL)
Max galulue nei ..................................... .............................. ............ 1.2A / 5V
Mana mea faʻatatau ........................... ..................... AC 100V ~ 240V 50HZ / 60Hz, DC5V / 2A
ituaiga vevela Gaoioiga ............ .. .................................................... -5 e + 45 ℃
Teuina ituaiga vevela ................................................................... -15 e + 55 ℃
tele sūsū Gaoioiga ...................... .......... ... .. ...... .10 i le 90% RH (Leai se totoʻoga)
Teuina sūsū faasolo ............................... .................. le 5 i le 95% RH (Leai se totoʻoga)
Faamatalaga:
Pls faaaogaina o le masini e pei o le aoaoga o loo lisiina i le tausia o le olaga atoa faaaogaina umi o le masini.
1.The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2.All parts will be free from the strong shake, hit, fall.
3.Touching the power adaptor with the wet hands is prohibited.
4.Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5.Pls turn the power off when the machines not used for long time.
6.Pls do not open the cover and do not touch the inside parts.
7.Pls use the original factory power adaptor.
FAQ:
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: