DVI1x2

EZIPHUMA:

• 1x DVI input bese 2xDVI okukhipha
• Support resolution:up to 4096×[email protected]
• Ukusekela ibanga elide isignali ukudluliswa
• Ukufaka ngamaminithi, Ayikho ukulahlekelwa izinga
• Usekela wonke ububanzi voltage DC zokufakwayo (DC5V)

PACKAGE OKUQUKETHWE:
1. Main iyunithi 1pcs
2. isixhumi sakho samandla kagesi 1pcs
3. Umsebenzisi ibhukwana 1pcs
EZIPHUMA kokusetshenziswa kubonwa:

FIG.1.0 engemuva Panel Buka

DC5V: DC okokufaka
IN: DVI-D imbobo yokufaka
OUT 1-4: DVI-D okukhipha port
QAPHELA: EDID Mode: Emva idabula ivuliwe, bese kukhona umshini isibonisi exhunywe kwi-OUT1, le idabula uzothola EDID ukubonisa umshini ixhunywe OUT 1. Uma kungekho yimuphi umshini isibonisi exhunywe kwi output1, umshini izosebenzisa okuzenzakalelayo EDID okukhiphayo.

 
FIG.1.0 Front Panel Buka

Amandla: Amandla LED
esiginali: esiginali LED
OPERATIONG AND CONNECTION:
1.Connect one single link DVI-D cable from a DVI signal source into the input port of splitter.
2.Connect single link DVI-D cables from TV/Monitor into the DVI output ports of splitter.
3.Connect DC plug of AC adapter to DC jack and inserted into the power socket.

FIG.1.1 UKUXHUMANA UMDWEBO

Ukucaciswa:
DVI esibonakalayo uhlobo ........................................................................... .DVI-D 29-pin, owesifazane
Single link input/output resolution …………………………………………up to 4096×[email protected]
Max isignali komkhawulokudonsa ...................... ...................................................... ..340MHz
Max Translations into Zulu izinga ......................... ............................... .................. 3.4Gbps yomkhiqizo Xhumanisa
wokufaka / lokukhipha TMDS-signal ............. ..................... ....... ... .. ......... .0.5 ~ 1.5Volts kk (TTL)
i-signal .............................. .. ......... wokufaka / lokukhipha DDC. ...................... Kk 5Volts (TTL)
Max ukusebenza zamanje ..................................... .............................. ............ 1.2A / 5V
Amandla adaptha ........................... ..................... AC 100V ~ 240V 50HZ / 60Hz, DC5V / 2A
Ithempelesha yokusebenzela ububanzi ............ .. .................................................... -5 ukuba + 45 ℃
Isitoreji lokushisa ububanzi ................................................................... -15 kuya + 55 ℃
Operating Ibanga lomswakamo ...................... .......... ... .. ...... .10 ku-90% RH (Ayikho ukufingqa)
Isitoreji Umswakama isukela ............................... .................. 5 kuya 95% RH (Ayikho ukufingqa)
Amanothi:
Pls usebenzise umshini njengoba imfundo efakwe ukugcina ukusetshenziswa esaphila isikhathi eside umshini.
1.The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2.All parts will be free from the strong shake, hit, fall.
3.Touching the power adaptor with the wet hands is prohibited.
4.Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5.Pls turn the power off when the machines not used for long time.
6.Pls do not open the cover and do not touch the inside parts.
7.Pls use the original factory power adaptor.
Imibuzo Evame Ukubuzwa:
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: