OEM China Catv Fixed Modulator - DVI 1X8 – GreenGo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking to the principle of "Super High-quality, Satisfactory service" ,We are striving to generally be a very good business partner of you for High Quality Agile Channel Modulator, Analog Tv Transmitter, High Gain Single Lnb, Our company is working by the operation principle of "integrity-based, cooperation created, people oriented, win-win cooperation". We hope we can have a friendly relationship with businessman from all over the world.
OEM China Catv Fixed Modulator - DVI 1X8 – GreenGo Detail:

FEATURES
l 1x DVI input and 8xDVI output
l Support resolution:up to 4096×2160@30Hz
l Support for long distance signal transmission
l Installs in minutes, No loss of quality
l Supports wide range voltage DC input (DC12V)
PACKAGE CONTENTS:
1. Main unit             1pcs
2. AC power adapter      1pcs
3. User manual          1pcs          
FEATURES OF THE INTERFACE:

1

 

FIG.1.0 Rear Panel View

 

DC12V: DC input
IN: DVI-D input port
OUT 1-8: DVI-D output port   
ON/OFF: Power Switch                              
NOTE : EDID MODE: After the splitter is powered on, and then there is a display machine connected to the OUT1, the splitter will get the EDID of display machine connected OUT 1. If there is no any display machine connected to output1, the machine will use default EDID output.
 

 2

 

 FIG.1.0 Front Panel View

Power: Power LED
Signal: Signal LED
1 – 8: OUT LED

OPERATIONG AND CONNECTION:

  1. Connect one single link DVI-D cable from a DVI signal source into the input port of splitter.
  2. Connect single link DVI-D cables from TV/Monitor into the DVI output ports of splitter.
  3. If the resolution is higher than 1920X1080@60Hz, you must use a DVI-D cables, the signal source and the display must be able to support this resolution.
  4. Connect DC plug of AC adapter to DC jack and inserted into the power socket.

2019-04-30_114500

FIG.1.1 CONNECTION DIAGRAM

 
SPECIFICATIONS:                                    
DVI interface type ………………………………………………………………….DVI-D 29-pin, female
Single link input/output resolution …………………………………………up to 4096×2160@30Hz
Max signal bandwidth………………….………………………………………………..340MHz
Max baud rate…………………….………………………….………………3.4Gbps Serial Link
Input/Output TMDS signal ………….……………………….…..……….0.5~1.5Volts p-p(TTL)
Input/Output DDC signal …………………………..……….…………………. 5Volts p-p (TTL)  
Max working current ……………………………….………………………… …………1A/12V
Power adapter ………………………………………AC 100V~240V 50HZ/60Hz, DC12V/2A
Operating Temperature range …………..……………………………………………. -5 to +45℃
Storage Temperature range…………………………………………………………. -15 to +55℃
Operating Humidity range ………………….……….…..…….10 to 90%RH (No Condensation)
Storage Humidity range………………………….………………5 to 95%RH (No Condensation)
Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the machine.

  1. The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
  2. All parts will be free from the strong shake, hit, fall.
  3. Touching the power adaptor with the wet hands is prohibited.
  4. Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
  5. Pls turn the power off when the machines not used for long time.
  6. Pls do not open the cover and do not touch the inside parts.
  7. Pls use the original factory power adaptor.

FAQ:
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:

No.

Problem Description

Solutions

1

Non-Power-Connected

1. Check if the power adaptor head is truly and correctly inserted the power socket.
2. Check the power if it is in on status.

2

No Picture / Abnormal Picture

1. Confirm the device has been turned on and properly connected.
2. Check the signal source output resolution is appropriate.
3. Device EDID read error, please reboot.
4. Check the cable quality.

3

Display format is not supported

  1. If the display unit does not support the resolution, you need to change the signal source output resolution.
  2. Change the signal source refresh frequency.

Product detail pictures:

OEM China Catv Fixed Modulator - DVI 1X8 – GreenGo detail pictures

OEM China Catv Fixed Modulator - DVI 1X8 – GreenGo detail pictures


Related Product Guide:
Free Space Optics (FSO) Communication Market 2019 With Top Countries Data : Global Key Leaders Analysis, Segmentation, Growth, Future Trends, Gross Margin, Demands, Emerging Technology by Regional Forecast to 2023 – 360 Research Reports | Qam Modulator Catv
Making A Cassette Mass Storage Interface | Qam Modulator Catv

It really is a good way to further improve our goods and service. Our mission would be to acquire inventive items to buyers with a very good encounter for OEM China Catv Fixed Modulator - DVI 1X8 – GreenGo, The product will supply to all over the world, such as: Brunei, Israel, Johor, Our company always committed to meet your quality demand, price points and sales target. Warmly welcome you open the boundaries of communication. It is our great pleasure to service you if you need a trusted supplier and value information.
  • The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
    5 Stars By Edwina from South Africa - 2016.10.25 15:53
    With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
    5 Stars By Nora from Sydney - 2016.08.18 18:38

    Related Products

    WhatsApp Online Chat !